DOS software varies greatly. See the printing section of your
software manual for information on accessing the printer driver
settings.
Changing the Default Settings
To change the printer's default settings, use the control panel
buttons. Your selections are indicated by the control panel lights.
Follow the steps below.
1. Make sure that the printer is turned off and that A4 or Letter
size paper is loaded in the sheet feeder.
2. Hold down the
to enter the default-setting mode.
The printer loads a sheet of paper and prints a brief summary
and instructions. It instructs you to select the language that
you want messages printed in (English, French, German,
Italian, Spanish, or Portuguese).
3. Press the
indicate the language of your choice, as shown below.
Language
English
French
German
Italian
Spanish
Portuguese
= On,
65
cleaning button and turn on the printer
cleaning button until the control panel lights
= Off