Epson 880 Daily Use page 42

1. Make sure that A4 or Letter size plain paper is loaded in the
sheet feeder.
2. Click the Utility tab in the printer driver, then click the Print
Head Alignment button.
3. Follow the on-screen instructions to align the print head.
For DOS users
Follow the steps below to align the print head.
1. Insert the printer software CD in your CD-ROM drive.
2. Type D:\SETUP at the DOS prompt. (If your CD-ROM drive
is assigned a drive letter other than "D", or if you are using the
floppy disk version, substitute the appropriate letter.)
3. Press the Enter key, then follow the on-screen instructions.
4. After running the setup program, type C:\EPCALIB2. (If your
hard drive is assigned a drive letter other than "C", substitute
the appropriate letter.)
5. Press the Enter key. The following window appears.
37