Canon POWERSHOT S500 User Manual page 55

In this mode, all you have to do
camera do everything else,
is pressthe shutterbuttonand letthe
Slide the mode switch to a and
turn the mode dial to a.
Aimthe cameraat the subject.
Usethe zoomleverto achievethe
desiredcomposition (relative
subjectsize in the viewfinder)(p.
40).
Pressthe shutterbuttonhalfway(p.
41).
• Two beeps will sound when the camera
has finished metering, and the upper
indicator besidethe viewfinder will light
green or orange, If the LCD monitor is on,
the AF frame will appear green.
• If the subjectis difficult to focus on,the lower
indicatorbesidetheviewfinderwill blinkyellow
andthe beepwill sound onetime.
Press theshutter button fully (p.
42).
• You will hoar the sound of the shutter
when the shutter activates,
• The picture appears for two seconds on
the LCD monitor.
i i
,,SeeFunctions Available in Each Shooting Mode (p. 160).
• With the Review function, you can change the length of time images
show on the LCD monitor after shooting, or set it sothey do not show
at all (p. 54).
53