Canon POWERSHOT S500 User Manual page 122

The c amera will not operate correctly ifyou c onnect itto your computer
before installing the driver and s oftware. Ifthis h appens, please refer to
the
Troubleshootir_g section of the Software Starter Guide.
• You do not need to turn off the camera or computer power when
making a USB connection.
• Please refer to your computer's manual for information regarding the
location of the USB port.
• You are recommended to use a fully charged battery pack or AC
Adapter Kit ACK500 (sold separately) to power the camera when
connecting to a computer (pp. 18, 140).
• All procedures performed with a connection to a USB 2.0 compliant
board are not guaranteed.
Install the driver and the software applications bundled
on the Canon Digital Camera Solution Disk.
Pleaseseethe SoftwareStarterGuide for the installationprocedures.
Usethesupplied interface cabletoconnect t hecomputer's
USBportto thecamera's DIGITAL t erminal.
USB Port DIGITALTerminal
Interface Cable __
120
• To connectthe interface cableto the camera's DIGITALterminal, lift the
terminal cover with a fingernail under its upper edgeand insert the
connector until it clicks into place.
• Always graspthe connector'ssidesto removethe interfacecable from
the camera's DIGITALterminal.