Epson ActionPrinter 4500 User Manual page 77

You load labels the same way that you load continuous paper except
that the paper thickness lever must be adjusted for printing labels. See
the
section on loading continuous paper earlier in this chapter. For the
correct paper thickness setting, see the table on page
WARNING:
Labels can easily peel off the backing and jam the printer.
Therefore, never use the
Also, never use the short tear-off function with labels. (Be
sure to set DIP switch 2-2 to off .) If a label does become
stuck in the printer, call the Epson toll-free number
(1-800-922-8911) for assistance.
Since labels are especially sensitive to temperature and
humidity, always use them under normal operating
conditions. Don't leave labels loaded in the printer between
jobs; they curl around
resume printing.
Never feed labels backward through the printer.
LOAD/EJECT
the
platen and may jam when you
Printing on Special
2-26.
button to eject labels.
Paper Handling
Paper
2-29