Commands Arranged by Topic
ESC U
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
Turns the mode on
1:
Turns the mode off
0:
Text printing is normally bidirectional. (Graphics printing is always
unidirectional.) This command moves the print head to the extreme
left (home) position; printing takes place from left to right. When this
mode is off and DIP switch 2-6 is on, multi-pass characters are
printed bi-directionally.
ESC EM
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for
Turns mode off
0:
Turns mode on
4:
R: Ejects a sheet. (No paper is loaded.)
The command should not be used unless the cut sheet feeder is
installed. It is ignored if any value other than
The cut sheet feeder mode can also be turned on and off by setting
DIP switch
1-8.
9-10
Command Summary
ESC
U
27
85
1B
55
ESC
EM
27
25
1B
19
Turn Unidirectional Mode On/Off
n
n
n
Control Cut Sheet Feeder
n
n
n
n:
0, 4,
or R is used for n.