Default Setting Check - Toshiba e-STUDIO 165 Quick Start Manual

4 SETUP FLOW

Default Setting Check

This section describes the items to be set before using this equipment through a network. Check
if the following setups have been done:
Setting the department code
Setting the paper size for
each drawer
Setting the device settings
Setting the terminal ID
32

Default Setting Check

Item
The department codes must be set to enable a network printing on a
department basis.
Reference: Operator's Manual for Copying Functions
Check if the paper size of each drawer of this equipment is specified
prior to network printing.
Reference: Operator's Manual for Copying Functions
Check if the device settings are made prior to network printing.
Reference: Setup Guide for Printing Functions
If the Fax Kit is installed, specify the terminal ID to identify the Fax termi-
nal information.
Reference: Operator's Manual for Facsimile Functions
Description/Reference
Chapter 5 "CHANGING EQUIPMENT'S SETTINGS"
"Department Code"
Chapter 5 "CHANGING EQUIPMENT'S SETTINGS"
"Paper Size Setting"
Chapter 10 "TopAccess ADMINISTRATION TAB PAGE-
SETUP MENU"
"Setting up Device Settings"
"Setting the device settings"
Chapter 5 "ENTERING VARIOUS FUNCTIONS"(??)
"Terminal ID Entry"