360050398
10.9.4 Password lost
If the user password is lost and High level security is set, the drive does not allow the user to access any
data. However, the drive can be unlocked using the master password.
If the user password is lost and Maximum security level is set, it is impossible to access data. However, the
drive can be unlocked using the ERASE UNIT command with the master password. The drive will erase all
user data and unlock the drive.
If both the user password and the master password are lost, the drive cannot be in normal operation mode.
User password lost
Level?
Maximum
ERASE PREPARE
ERASE UNIT
with master password
Normal operation
but data lost
Figure 6 User password lost
Toshiba Corporation Digital Media Network Company
Page 142 of 157
© 2005, Copyright TOSHIBA Corporation All Rights Reserved
High
UNLOCK with master password
Normal operation