Toshiba MK3006GAL Specification page 103

10.8.42.1 SMART Read Attribute values
COMMAND CODE
REGISTER SETTING
DR
CY
HD
SN
SC
FT
This command transfers SMART data as 512 byte data. Upon receipt of this command, the drive sets
BSY, sets the SMART data on the buffer. Then, it sets DRQ, resets BSY, issue an interrupt to report that
the drive is ready to transfer data.
Byte
0-1 Data structure revision number
2-361 1st-30th Individual attribute data
362 Off-line data collection status
363 Self-test execution status
364-365 Total time in seconds to complete off-line data collection activity
366 Reserved
367 Off-line data collection capability
368-369 SMART capability
370 Error logging capability
7=1 Reserved
371 Self-test Failure Checkpoint
372 Short self-test routine recommended polling time (in minutes)
373 Extended self-test routine recommended polling time (in minutes)
374-510 Reserved
511 Data structure Checksum
BYTE 0-1: Data structure revision number
0010h is set
BYTE 2-361: Individual attribute data
The following table defines 12BYTE data for each Attribue data.
1 0 1 1 0 0 0 0
DRIVE No.
C24Fh
D0h
0 1= Device error logging supported
Toshiba Corporation Digital Media Network Company
© 2005, Copyright TOSHIBA Corporation All Rights Reserved
REGISTER
NORMAL COMPLETION
no change
no change
no change
no change
no change
Description
Page 103 of 157