TEC MA-1350-1 SERIES Owner's Manual page 62

Paper jam has occurred.
Cause: Paper roll is placed on the skew, or foreign substance exists in the paper path of the inside of the
printer.
Measure: Remove the jammed paper as follows.
3. Trouble concerning Keyboard
Key on the keyboard does not function.
Cause 1: Control Lock is in the OFF position.
Measure: Turn the Control Lock to the positions other than OFF using the Control Key.
Cause 2: Failure of the keyboard itself
Measure: Ask the store where purchased.
4. Trouble concerning Drawer
Drawer does not open.
Cause 1: Drawer catches foreign substance (coin, etc.).
Measure: Try to open the drawer by removing the foreign substance, using a ruler or something. If not
effective, ask the store where purchased.
Cause 2: Failure of the drawer itself
Measure: Ask the store where purchased.
5. Trouble concerning Display
Display displays nothing.
Cause 1: Register is not securely plugged in.
Measure: Securely plug in an outlet.
Cause 2: Control Lock is in the OFF position.
Measure: Turn the Control Lock to the positions other than OFF using the Control Key.
1
To open the upper side of the printer, press simul-
taneously two levers (green) provided on both
sides of the printer in the direction of the arrow.
2
Raise up the upper side of the printer in the direc-
tion of the arrow, then remove the jammed paper.
After removing it, return the upper side of the
printer until it clicks.
- 55 -
EO1-11126
MA-1350-1 SERIES