Ating Instructions; Swing Button - Soleus Air GH-PAC-12E1 Operating Instructions Manual

REMOTE CONTROL OPER
REMOTE CONTROL
ON/OFF
Press the ON/OFF (POWER) button once to manually
turn the unit on. Press the Power button once more to
turn the unit
MODE
Press the MODE Button repeatedly to cycle between the
di erent modes.

ATING INSTRUCTIONS

SIGNAL TRANSMITTER
BLOW
ON/OFF BUTTON
MODE BUTTON
AUTO
COOL
DRY
FAN
NOTE: Heat Mode is only
HEAT
available on GH-PAC-12E1HP
- / +
- / + BUTTONS
When the unit is in Air Conditioner or Heater (GH-PAC-
12E1HP) mode you can select your desired temperature.
Press the TEMP SELECT buttons ( + or -) to select
your desired temperature setting. The temperature on the
LCD display on the remote control will increase or de-
crease accordingly. Hold the +/- buttons for two seconds
to rapidly increase or decr e ase the temperature. Temp.
range is 61°F—86°F.
FAN
FAN BUTTON
Press the Fan Speed button to change fan speeds.
Fan Speeds:
Low Speed
High Speed
NOTE: When the unit is in Dehumid
the fan speed is not adjustable.

SWING BUTTON

Press the Up and Down Swing Button to turn on and
the vertical swing mode. In vertical swing mode, the lou-
vers will rotate up and down to circulate more air.
When the unit is o , press the Up and Down Swing But-
ton and "+" at the same time to enable stationary swing
mode. Stationary Swing mode allows for more control
over the way the louvers swing up and down. The Swing
icon on the Remote LCD will blink twice when this is
Blinks for 2 Seconds
In Stationary Swing mode, press the Up and Down
Swing Button to change the swing pattern per below:
Disable Stationary Swing Mode by pressing the Up and
Down Swing Button and "+" button at the same time.
The Swing Icon on the Remote LCD will blink twice
when this is disabled.
Medium Speed
(DRY) mode,
10