Viewing Event Log; Configuring Settings; Configuring Network Settings - Lenovo ThinkServer TD230 User Manual

Sensor selection pull-down box
Sensor Readings list
Show Thresholds button
Hide Thresholds button
Refresh

Viewing Event Log

The Event Log page displays the event logs.
The following table lists the options available in this page:
Event Log category drop-down list
Event Log list
Clear Event Log button

Configuring settings

The Configure Settings page is used to configure settings. By default, it opens in the Network Settings
window.
Warning: The Remote Management Module IP address must be on a different subnet than the baseboard IP
address used for management traffic.

Configuring network settings

The Network Settings page is used to configure the network settings. It provides options to do either
of the following:
• Automatic: Obtain the IP address automatically (use DHCP).
• Manual: Manually configure one.
The following table lists the options available in this page:
16
ThinkServer TD230 Remote Management User Guide
Option
Option
Task Description
Select the type of sensor readings to display in the list.
The default is to see all sensors.
Selected sensors shown with their name, status, and
readings.
Click it to expand the list, showing low and high threshold
assignments. See the critical (CT) and non-critical (NC)
thresholds for the selected sensors. Use scroll bar at the
bottom to move display left and right.
Click it to return to original display, hiding the threshold
values.
Click it to refresh the selected sensor readings.
Task Description
Select the type of events to display in the list.
Selected sensors are shown with their name, status, and
readings. This includes a list of the events with their ID,
time stamp, sensor name, sensor type, and description.
Click it to clear the event logs.