HP ProLiant ML310e User Manual page 60

Remove the EMI shield.
a.
Install the HP CS power supplies.
b.
Install any device originally installed in the upper media drive bay.
15.
Install the EMI shield in the lower media drive bay.
16.
Install the access panel (on page 21).
17.
If the lower media bay blank is not attached to the tower bezel, install it.
18.
Lock the tower bezel.
19.
Connect each power cord to the server.
20.
Connect each power cord to the power source.
21.
Power up the server (on page 18).
22.
Hardware options installation 60