Preparations; Fastening The Lens Cover - Hitachi PJ-LC7 User Manual

Preparations

Preparations

Fastening the lens cover

WARNING ►Do not fasten the lens cover during use or immediately after
use. Handling while the projector is in a high temperature could cause a burn
and/or malfunction to the projector. Before operating, make sure that the power
switch is off, that the power cord is not plugged in, and that the projector is cool
adequately.
To avoid losing, please fasten the lens cover to the projector using the strap.
1.
Slowly turn over the projector, so that the bottom is facing up.
2.
Fix the strap to the strap ring of projector.
Projector (Bottom side)
3.
Fix the strap to the strap ring of lens cover.
Lens cover
Strap ring
4.
Attach the lens cover to the lens of projector, and slowly turn over the
projector, so that the top is facing up.
6
Strap ring
(1)
(1)
Strap
Strap ring
Strap
(2)
Strap ring
Strap
(2)
Strap ring
Strap
Strap ring