Filter Time, Service - Hitachi PJ-LC7 User Manual

OPTION menu (continued)
Item
LAMP TIME
FILTER TIME
The lamp time is the time counted after the last resetting. It is shown
in the OPTION menu as the use time of the lamp. Performing this
item resets the time.
Pressing the RESET button on the remote control or the button ►
on the projector for about 3 seconds displays a dialog to make sure.
To perform reset, point at RESET using the button ▲.
RESET  CANCEL
• Please reset the lamp time only when you have replaced the lamp,
for correct messages about the lamp.
• About the lamp replacement, please see the section "Lamp"
(41, 42).
The filter time is the time counted after the last resetting. It is shown
in the OPTION menu as the use time of the air filter. Performing this
item resets the time.
Pressing the RESET button on the remote control or the button ►
on the projector for about 3 seconds displays a dialog to make sure.
To perform reset, point at RESET using the button ▲.
RESET  CANCEL
• Please reset the filter time only when you have cleaned or
replaced the air filter, for correct messages about the air filter.
• About the caring the air filter, please see the section "Air filter"
(43).
Multifunctional settings
Description
LAMP TIME
0
RESET
CANCEL
FILTER TIME
0
RESET
CANCEL
39