Easy Menu; Filter Time, Language - Hitachi PJ-LC7 User Manual

EASY MENU

With the EASY MENU, items shown in the table below can
be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
Item
ASPECT
ZOOM
KEYSTONE
MODE
BRIGHT
CONTRAST
COLOR
TINT
Using the buttons ◄/► switches the mode for aspect ratio.
See the item ASPECT of section IMAGE menu. (30, 19)
Using the buttons ◄/► adjusts the zoom.
See the item ZOOM of section SETUP menu. (34, 19)
Using the buttons ◄/► corrects the keystone distortion.
See the item KEYSTONE of section SETUP menu. (34, 20)
Using the buttons ◄/► switches the mode of picture type. The
modes of picture type are combinations of a mode of GAMMA
(27) and a mode of COLOR TEMP (28). Choose a suitable
mode according to the projected source.
NORMAL  CINEMA  DYNAMIC
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
• When the combination of GAMMA and COLOR TEMP differs from
pre-assigned modes above, the display on the menu for the MODE
is "CUSTOM".
Using the buttons ◄/► adjusts the brightness.
See the item BRIGHT of section PICTURE menu. (27)
Using the buttons ◄/► adjusts the contrast.
See the item CONTRAST of section PICTURE menu. (27)
Using the buttons ◄/► adjusts the strength of whole color.
See the item COLOR of section PICTURE menu. (28)
• This item can be chosen only at a video signal.
Using the buttons ◄/► adjusts the tint.
See the item TINT of section PICTURE menu. (28)
• This item can be chosen only at a video signal.
Multifunctional settings
Description
EASY MENU
ASPECT 4:3
ZOOM +0
KEYSTONE +0
MODE NORMAL
BRIGHT +0
CONTRAST +0
COLOR +0
TINT +0
SHRPNESS +3
WHISPER NORMAL
MIRROR NORMAL
RESET
FILTER TIME 0
LANGUAGE ENGLISH
Go To Advance Menu...
25