Epson Stylus Photo R300 Series User Manual page 79

2. Click , then choose
View
Click Roll to create a
new roll, or . . .
click an existing roll
PRINT Image
Matching photos
are marked here
Note: If you need help with Film Factory, select it from the Help menu or check
the on-screen Getting Started Guide that was installed with Film Factory.
3. Select a "roll of film" or click the
4. If your photos were taken with a digital camera that supports PRINT Image Matching,
the P.I.M. logo appears in your photo thumbnails. Right-click (Windows) or
-click (Macintosh) a photo thumbnail to display information about the P.I.M.,
Ctrl
P.I.M. II, or Exif Print data in the photo file. (If you retouched a PRINT Image Matching
photo, the P.I.M. logo may not appear.)
5. Click the photo you want to print, or click the
all the photos in a roll. Then go to step 6.
6. To import a photo into Film Factory, click the
Click
From File
Click
From Removable Media
Click
From PC Card
Click
From Twain Device
your device is already selected, the software will open. If not, click
and select your scanner or digital camera.
. You see a screen like the one below:
Roll
button and select
Roll
to import a photo from your computer's hard drive.
to import a photo from a disk or CD-ROM.
to import a photo from a PC card in a card reader.
to import a photo from a scanner or digital camera. If
.
New Roll
button at the top of the screen to select
All
button, then:
Import
Using PRINT Image Matching
,
Import Settings
79