Epson Stylus Photo R300 Series User Manual page 21

When you connect a digital camera or storage device, the printer treats it like a memory card.
Follow these steps to connect it:
1. Remove any memory cards from the printer.
(If you leave a card in the printer, images will be read from the card instead of your
camera or external storage device.)
2. Connect the USB cable from your camera or data storage device to the
on the front of the printer. Some digital cameras require a special USB cable; if so, be sure
to use the one that came with the camera.
3. Turn on the printer and your camera or data storage device. After a moment, the printer
reads and counts the number of images on your device. When it's done, you see a screen
similar to this on the printer's control panel and your images are available for printing:
Note: If you've backed up your images on Zip disk, CD, or another storage device
(see page 39), they're stored in folders (001, 002, etc.). Use the
on the printer's control panel to highlight the folder you want to open, then press
OK to open it.
EXT I/F
EXT/IF USB
port
and buttons
Getting Photos into the Printer
USB port
21