Epson Stylus Photo R300 Series User Manual page 108

The margins are incorrect.
Make sure the paper settings are correct for your paper size.
Make sure the paper is positioned correctly in the feeder, all the way to the right. Slide the
left edge guide against the paper.
See your software documentation for instructions on choosing the correct margins for
your paper size. The margins must be within the printable area of the page. See "Printer
Specifications" in your on-screen Reference Guide.
If you are printing without a computer, make sure the Crop and Fit to Frame settings are
set to . See page 31.
Off
Image size or position is incorrect.
Make sure paper and layout options are set correctly.
Your images may not match the width/height proportions (aspect ratio) of the paper size
or layout you're using. Images may be cropped to fit the paper and layout.
You see incorrect characters.
Make sure the USB cable is securely connected and meets the system requirements on
page 113. Then try printing again.
Make sure your printer is selected in your software, or is set as the active printer in the
Print Center or Macintosh Chooser.
If you're using a USB hub, connect the printer directly to your computer instead.
The wrong photo is printed.
The photo numbering in the printer may not match the numbering in your camera. If you're
printing without a computer, first print an index to identify your photos by number.
Too many copies are printing.
Make sure that the Copies option in your printer software or program is not set for multiple
copies.
108
Problem Solving