Preface; Introduction; Contents - Texas Instruments Extensa 60x Series Maintenance Manual

Introduction

This manual provides installation, operation and servicing data for the Extensa
and 65x Series Notebook Computers.
Intended Audience
This manual is primarily intended for use by qualified service technicians but contains
information useful to non-technical users.

Contents

This manual contains six sections that are common to all Extensa 60x and 65x Series
Notebook Computers (differences described as they are covered):
Section 1: General Description - Introduces the main features of the Extensa 60x
and 65x Series Notebook Computers; identifies all options, provides physical
and electrical specifications.
Section 2: Installation - Describes how to unpack, install options and begin using
the notebook.
Section 3: Operating Instructions - Describes the notebook computer operating
controls and indicators and basic operating procedures required to support
maintenance operations.
Section 4: Theory of Operation - Provides a block diagram level theory of operation
for the Extensa Series Notebooks.
Section 5: Troubleshooting Procedures - Provides troubleshooting procedures for the
notebook computer series.
Section 6: Field Service - Provides preventive and corrective maintenance
procedures for the notebook computer series including FRU removal/
replacement procedures.
This manual also includes a set of appendices containing model-dependent
maintenance data including;
Appendix A: 60x Series Maintenance Data - Contains listing of FRUs and set of
schematics for the Extensa 60x Series Notebook Computers.
Appendix B: 65x Series Maintenance Data - Contains listing of FRUs and set of
schematics for the Extensa 65x Series Notebook Computers.

Preface

TM
60x
Preface vii