Removing/Replacing The Display Bezel - Texas Instruments Extensa 60x Series Maintenance Manual

6.
Lift up and remove the Touchpad buttons.
7. Lift up and remove the Touchpad.
8. Replacement is essentially the reverse of Steps 1 through 7.
Remove 1 screw
and disconnect J1
Lift up and remove
touchpad buttons
Caution: If the notebook is powered up with the LCD bezel removed, you
can be exposed to high voltages which could result in shock and equip-
ment damage. Ensure that the batteries and AC adapter are removed from
the notebook when working on the LCD/Display assembly.

6.5.22 Removing/Replacing the Display Bezel

To remove/replace the Display Bezel, use the following the procedure;
Figure 6-28 Removing/Replacing the Touchpad Assembly
Remove two side screws
and remove metal plate
Lift up and remove
Touchpad
Field Service 6-31