Battery Pack Installation - Texas Instruments Extensa 660 Series Maintenance Manual

2.5 Battery Pack Installation

1. Turn off the computer and disconnect the AC adapter if attached to the
computer.
NOTE: If removing an existing battery, press the battery release latch located
underneath the notebook as shown in Figure 2-8 and remove the battery.
2. Look for the hand hold and insert the battery with hand hold down until
battery pack snaps in place.
Figure 2-8 Battery Pack Removal/Installation Installation
Optional Media
Bay Secondary
Battery Pack
(Li-Ion)
NiMH or Li-Ion
Primary Battery
Secondary
Battery Release
Latch
Primary Battery Release
Latch
Installation 2-11