Setting The Bios Configuration Jumper; Location Of The Bios Configuration Jumper Block - Intel DB43LD Product Manual

Intel Desktop Board DB43LD Product Guide

Setting the BIOS Configuration Jumper

NOTE
Always turn off the power and unplug the power cord from the computer before
moving the jumper. Moving the jumper with the power on may result in unreliable
computer operation.
Figure 24 shows the location of the Desktop Board's BIOS configuration jumper block.
Figure 24. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block determines the mode of the BIOS Setup program.
Table 14 shows the jumper settings for the BIOS Setup program modes.
52