Wake From Usb; Pme# Signal Wake-Up Support; Wake# Signal Wake-Up Support; Wake From Ps/2 Devices - Intel DB43LD Product Manual

Wake from USB

USB bus activity wakes the board from an ACPI S1 or S3 state.
NOTE
Wake from USB requires the use of a USB peripheral that supports Wake from USB
and support in the operating system.

PME# Signal Wake-up Support

When the PME# signal on the PCI bus is asserted, the board wakes from an ACPI S1,
S3, S4, or S5 state.

WAKE# Signal Wake-up Support

When the WAKE# signal on the PCI Express bus is asserted, the computer wakes from
an ACPI S1, S3, S4, or S5 state.

Wake From PS/2 Devices

PS/2 device activity wakes the board from an ACPI S1, S3, S4, or S5 state. However,
when it is in an S4 or S5 state, the only PS/2 activity that will wake the board is the
Alt-PrintScreen key combination.

Wake From Serial Port

Serial port activity wakes the board from and ACPI S1 or S3 state.

ENERGY STAR* Qualified

Intel Desktop Board DB43LD is ENERGY STAR 4.0 and 5.0 Category A capable.
For information about the ENERGY STAR specifications, go to
http://intel.com/cd/channel/reseller/asmo-na/eng/337748.htm.

Speaker

A speaker is mounted on the Desktop Board. The speaker provides audible error code
(beep code) information during the Power-On Self-Test (POST).
Desktop Board Features
27