Quickly Locating A Scene Using The Zero Set Memory Function - Sony TRV230 - Digital8 Camcorder Operating Instructions Manual

Quickly locating a scene using the zero
set memory function
Your camcorder goes forward or backward to automatically stop at a desired scene
having a counter value of "0:00:00".
Use the Remote Commander for this operation.
Use this function, for example, to view a desired scene later on during playback.
(1) In the playback mode, press DISPLAY.
(2) Press ZERO SET MEMORY at the point you want to locate later. The counter
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the counter's zero point. The tape stops
(5) Press N. Playback starts from the counter's zero point.
Notes
• The zero set memory function works only for tapes recorded in the Digital8
• When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
function is canceled.
• There may be a discrepancy of several seconds from the time code.
If a tape has a blank portion in the recorded portions
The zero set memory function may not work correctly.
56
shows "0:00:00" and the ZERO SET MEMORY indicator flashes on the screen.
automatically when the counter reaches approximately zero. The ZERO SET
MEMORY indicator disappears and the time code appears.
DISPLAY
m
x
ZERO SET
MEMORY
N
system.