External Devices
Symptoms
The equipment connected
to the camcorder via an
i.LINK connection does
not react as expected, for
example, no picture
appears on its screen.
138
Troubleshooting
Cause
"Input Source Select" of the VIDEO
SET menu is set to "Camera."
It sometimes takes time for the
connected equipment to recognize
the operation.
Remedy
Set it to "i.LINK."
Wait for about 15 seconds. If the connected
equipment still does not react, do the following:
• Check the i.LINK cable, for example, by re-
plugging it.
• Turn the power off, and connect the cable again.
• Change the i.LINK cable.