Sony PMW-F3L PMW-F3K Operating Instructions Manual page 126

Solid-state memory camcorder
Hide thumbs Also See for PMW-F3L PMW-F3K:
Table of Contents

Advertisement

Connecting with a USB cable
When you connect the camcorder or the SBAC-
US10 SxS Memory Card USB Reader/Writer
(optional) using the supplied USB cable, the
memory card in the slot is acknowledged as an
extended drive by the computer.
When two memory cards are mounted in this
camcorder, they are acknowledged as two
independent extended drives by the computer.
SxS memory card
SBAC-US10
(optional)
Notes
• When connecting the USB cable to the
computer, be careful to check the form and
direction of the USB connector.
• The camcorder and the SBAC-US10 do not
work on the bus power from the computer.
Supply the operating power independently.
Checking the connection to the
camcorder
1
Turn the camcorder on.
A message prompting you to confirm that
you wish to enable the USB connection is
displayed on the LCD monitor/viewfinder
screen.
126
Operating Clips With a Computer
(mini-B)
USB cable
USB cable
(supplied
(supplied with
with the
SBAC-US10)
camcorder)
Connect USB Now?
Execute
Cancel
Note
This message will not be displayed while
another confirmation message or in-progress
message (e.g., for formatting or restoration of
an SxS memory card) is shown on the screen.
It appears when formatting or restoration is
completed.
The message is also not displayed while the
CLIP INFO screen is shown on the screen. It
appears when an operation on the CLIP
INFO screen is completed or you return to
the thumbnail screen.
2
Select "Execute" by operating the jog
dial.
The screen displays the following:
USB Connecting
3
With Windows, check that the memory
card is displayed as a removable disk in
My Computer.
With Macintosh, check that a "NO
NAME" or "Untitled" folder was
created on the desktop.
This indicates that the connection is active.
(The folder name on the desktop of the
Macintosh computer can be changed as
needed.)
Note
The following operations must be eliminated
when the access lamp is lit in red.
• Turning the power off or disconnecting the
power cord
• Removing the SxS memory card
• Disconnecting the USB cable
When using the SBAC-US10, refer to the operating
instructions of the SBAC-US10.

Advertisement

Table of Contents
loading

Table of Contents