Sony PMW-F3L PMW-F3K Operating Instructions Manual page 117

OTHERS
Menu items Subitems and setting values Contents
Battery INFO
Type
Showing
MFG Date
information
Charge Count
regarding the
battery pack
Capacity
(display only)
Voltage
Remaining
Genlock H Phase (HD)
–999 to +999 (±0)
Setting Genlock
operation
H Phase (SD)
–999 to +999 (±0)
Trigger Mode Internal / Both / External
Setting whether to
trigger recording
start/stop for an
external device
connected to via
the i.LINK(HDV/
DV) connector
The type (product name) is displayed.
The date of manufacture is displayed.
The accumulated number of times of charge/discharge is
displayed.
The estimated total capacity of full charge is displayed.
The current output voltage is displayed.
The current remaining level is displayed.
Set the H phase (phase of the horizontal sync signal) of HD
signal for genlock operation.
Set the H phase (phase of the horizontal sync signal) of SD
signal for genlock operation.
Internal: To activate recording start/stop operations only for
an SxS memory card in a built-in slot.
Both: To activate recording start/stop operations both for an
SxS memory card in a built-in slot and the external
recording device connected via the i.LINK(HDV/DV)
connector.
External: To activate recording start/stop operations only for
the external recording device connected via the
i.LINK(HDV/DV) connector.
Setup Menu List 117