Table of Contents
Advertisement
Post-SETUP Procedures
If you have just run SETUP for the first time and your system
has not been configured, you now need to install the operating
system on your computer. See your operating system manual
for instructions.
After you have installed your operating system, you can install
any software you plan to use. See your application program
manuals for instructions.
The VGA Utilities diskette contains special drivers to enhance
the display capabilities of your built-in VGA adapter with
certain applications. If you want to install these drivers, see the
readme file called VGADRV.TXT in the root directory of the
VGA Utilities 1 diskette. To print this file, enter the following
command at the DOS prompt:
COPY A:VGADRV.TXT LPTl
If your computer came configured with a hard disk, the
README file may already be loaded on the hard disk. You can
access it by loading Windows and clicking on the VGA Utils
group icon. Then select the README file icon.
Running the SETUP Program
2-19
Advertisement
Table of Contents
