Epson 486SX User Manual page 55

2. Press IEnter You see a menu such as the following:
Drive
Number of cylinders
Nunher of heads
Number of sectors
Precomp. cylinder
Landing zone
Total capacity (MB)
The menu lists the settings you can change for each
drive: the number of cylinders, the number of read/write
heads, the number of sectors, the precompensation
cylinder, and the landing zone (the cylinder on which you
park the heads when moving the computer). It also
displays the total storage capacity in megabytes.
3. If you want to change the settings for drive 1 (which is
drive C on most computers), press IEnter] to highlight
Drive 1:. If you want to change the settings for drive 2,
press m and then + to highlight Drive 2 : .
4. Press m again. You see this submenu:
None
T y p e 3 4
User defined
1: Type 34
723
13
51
O F F F F
722
234.06
Drive 2:
Number of cylinders
Number of heads
Number of sectors
Precomp. cylinder
Landing zone
Total capacity (MB)
Running the Setup Program
None
2-21