Epson 486SX User Manual page 121

Removing SlMMs
If you need to remove SIMMs from your computer, have your
dealer do it for you or follow the steps below. If you remove
them yourself, check the table on page 6-14 to be sure you
remove SIMMs from the correct sockets.
Follow these steps to remove SIMMs:
1. Turn the memory card on your work surface so the
connectors at the bottom of the board are toward you.
2. Remove SIMMs from the right sockets first. Use your fingers
or two small screwdrivers to pull away the tabs that secure
the SIMM at each end. Be careful not to pull the tabs too far,
or they may break.
As you pull away the tabs, the SIMM falls to the right at an
angle. Release the tabs and carefully remove the SIMM
from the socket.
3. Repeat step 2 for each SIMM you need to remove.
6-18
Installing and Removing Options