Table of Contents
Advertisement
10-4-3 REASSEMBLY
(1)
Install the receptacles, no-fuse breaker, terminals, switches, etc. on the control panel and wire them.
NOTE
: Circuit diagrams are shown in Section 12. Colored wires
are
used for easy identification, and are
of the correct capacity and size. Use heat-resistant type wires (permissible temperature range
75°C
or
over) in the specified gauge shown in the circuit diagrams.
(2) Connect the wires
o f
control panel components.
(3) Attach the control panel to the control box.
M4
screw
.
.
. 8
pcs.
1.2
-
1.5
N-m
12
-
15 kgcrn
8 . 7
-
10.9 f"
-
52-
Advertisement
Table of Contents
