Table of Contents
Advertisement
Part to remove
3otor
3ont Cover
Description
4. Screw the bolt into the thread of the rotor
5. Torque the bolt using a socket wrench
shaft.
until the rotor comes
off
loose.
The hydraulic pressure inside the
rotor shaft takes apart the rotor from
the engine shaft.
:4) Wipe off oil thoroughly from rotor shaft
and enaine PTO shaft.
Remarks
Do
not stick
out
your
face over the rotor.
It may jump
up
on
separation.
(1) Remove the front cover.
Loosen the four bolts and remove the
front cover.
M8 x 20mm bolt and washer
Ass'y .
.
. 4 pcs.
I
Fig.
1021
7
-
44-
Tool
Socket wrench
1 2 mm socket
wench
Advertisement
Table of Contents
