Manager / Maintenance Mode; Manager Mode; Maintenance Mode - Star Trac Fitness E-TBT Owner's Manual

M / M
ANAGER
After using your STAR TRAC E SERIES TOTAL BODY TRAINERS for a period of time, you may wish to change some of its settings.

MANAGER MODE

The Manager Mode allow you to query and modify the basic settings of your Total Body Trainer. To enter Manager Mode:
1. Press and hold the
2. A beep will sound and "MANAGER MODE" will display momentarily in the Message Window.
3. Release all keys. "SERIAL NO #####" will display in the Message Window.
The system will automatically exit Manager Mode if no key is pressed for 30 seconds.
The following keys are used to modify settings in MANAGER MODE:
ly.
ments of 1 unit . These keys do not save the new value - see
Updates (saves) the values of all parameters in Flash memory, and exits Manager Mode.
To exit Manager Mode without saving any values or settings, press the Q
The items that you may display and change with the previous keys are:
Lowest
Item Value
Serial No 0
Date 01/00
Display Vers 1 01.00
Display Vers 2 01.00
LCB Vers 01.00
Units English
Time 5
Weight 50 (Lb)
22 (KG) 158 (KG) 158 (KG)
Language N/A

MAINTENANCE MODE

Your Service Representative may need to check accumulated data about the past usage of your STAR TRAC E SERIES TOTAL BODY
TRAINER, test its display controls, or investigate error messages. For these reasons, your Total Body Trainer is equipped with a
Maintenance Mode. The Maintenance Mode includes all of the items available through Manager Mode, plus additional items for Service
and Diagnostic use. To enter Maintenance Mode:
1. Press and hold the
2. A beep will sound and "MAINTENANCE MODE" will display momentarily in the Message Window.
3. Release all keys. "SERIAL NO #####" will display in the Message Window.
STAR TRAC E SERIES TOTAL BODY TRAINERS O
AINTENANCE
and keys together.
,
Adjust the value of the displayed parameter up and down, respectively, in incre-
Highest Default
Value Value Meaning
65535 0 Serial number (set by factory)
12/99 01/05 Manufacture date for the Total Body Trainer (set by factory)
99.99 N/A Display panel software version (set by factory)
99.99 N/A Display panel software version (set by factory)
99.99 N/A Display panel software version (set by factory)
Metric English English = units of pounds, miles, feet, inches;
Metric = units of kilograms, kilometers, centimeters.
99 99 Maximum time in minutes allowed for program, excluding warm-up and cool-
down.
350 (Lb) 350 lbs Default (to user), typical weight in lb (UNITS=English), or kg
(UNITS=Metric).
N/A ENGL Language is English (ENGL), Dutch (DUTC), French (FREN), German (GERM),
Portuguese (PORT), Spanish (SPAN), Swedish (SWED), Italian (ITAL) or
Katakana (KATA).
and keys together.
,
M
ODE
Display the next and previous parameters, respective-
below.
S
UICK TART
' M
WNER S ANUAL
key.
25