Page 1
Star Trac Instinct ™ Vertical Row ’ W N E R A N U A L STAR TRAC 14410 Myford Road Irvine, California 92606 Telephone: (800) 228-6635, (714) 669-1660 Fax: (714) 508-3303 http://www.startrac.com email: support @startrac.com September 2006...
Warranty and Disclaimer ............... . Copyright 2006. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written permission from Star Trac.
Page 3
STAR TRAC INSTINCT VERTICAL ROW O ’ STAR TRAC INSTINCT VERTICAL ROW O ’ WNER ANUAL WNER ANUAL...
Our mission is to provide prod- ucts to mold lifelong habits for health and fitness, and the INSTINCT VERTICAL ROW will provide the path to meet your goals.
NSTRUCTIONS STAR TRAC warrants all frameworks for a period of 10 years. All moving parts are warranted for 1 year. 10 year limited warranty on structur- Read this Owner's Manual carefully before assembling, servicing or using your STAR TRAC INSTINCT VERTICAL ROW.
Verify that all parts listed above are included in your shipment. Take time now to enter your INSTINCT VERTICAL ROW serial number in the space below. If parts are missing, or if you have any operational questions, please call Star Trac’s Service department at (800) 503-1221; have your serial number ready.
(2) using two screws (45) and end caps (19). Rotate the leverage arm back until it rests against the stop on the main frame. STAR TRAC INSTINCT VERTICAL ROW O ’ STAR TRAC INSTINCT VERTICAL ROW O ’ WNER...
Page 8
(available through the STAR TRAC Parts Department). Fill the damaged area sparingly, using two or more coats. Allow the area to dry thoroughly between coats. Once the touch-up is complete, it can be left “as is”, or it can be blended and color- sanded to the surrounding surface.
Only components supplied or approved by Star Trac shall be CAUTION: BE SURE to keep the weight belt straight when installing the retaining screw (41) in the belt used to maintain and/or repair the unit.
(1). The INSTINCT VERTICAL ROW must be anchored to the floor using through bolts or anchoring studs. Each foot pad on the Hold one upper shroud (32) in position against unit provides two anchoring holes that will accommodate bolts of up to 12mm (7/16") diameter.
Need help?
Do you have a question about the instinct and is the answer not in the manual?
Questions and answers