Specifications - Stanton M.207 User Manual

Specifications
1. POWER:
2. DIMENSIONS (H x W x D)
3. WEIgHT:
4. STANDARD TEST CONDITION:
5. INPUT/OUTPUT IMPEDANCE & SENSITIVITY:
(EQ FLAT, UNITY GAIN (ALL GAIN, LEVEL AT CENTER, FADER MAXIMUM), FX OFF, LOAD=100K ohm)
5-1. Input Impedance and Reference Level:
Aux:
Line:
Phono:
Mic:
5-2. Output Impedance and Level:
Rec:
Master Unbal:
Master Bal.(Load=600 ohm)
Phones (Load=32 ohm)
6. FREQUENCY RESPONSE: (EQ FLAT, UNITY GAIN, FX OFF, LOAD=100K ohm)
Line, Aux:
Phono:
Mic:
7. THD + N: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, LOAD=100K ohm)
Line, Aux:
Phono:
Mic:
8. MAXIMUM INPUT: (1 kHz, THD=1%, EQ FLAT, UNITY GAIN, FX OFF, LOAD=100K ohm)
Line, Aux:
Phono:
Mic:
9. MAXIMUM OUTPUT: (1 kHz, THD=1%, EQ FLAT, MAXIMUM GAIN, FX OFF, LOAD=100K ohm)
Master:
Rec:
Phones
10. NOISE FLOOR: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, A-WEIGHTED, LOAD=100K ohm)
Line, Aux:
Phono:
Mic:
11. CROSSTALK: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, A-WEIGHTED, MASTER = +14 dBV OUTPUT)
L.R Separation:
Between Channels:
12. EQ: (UNITY GAIN, FX OFF, W/20 kHz LPF, LOAD=100K ohm)
Low
Mid
High
13. CHANNEL BALANCE:
14. FADER KILL: (EQ FLAT, UNITY GAIN, FX OFF, W/20 kHz LPF, A-WEIGHTED, MASTER = +14 dBV OUTPUT)
Channel Fader:
Crossfader:
15. ACCESSORIES:
User Manual
AC Power Cord
AC 100 – 240 V, 50/60 Hz, 16 W
108.2 mm x 250 mm x 352.6 mm
10.82 cm x 25 cm x 35.26 cm
9.25 lbs / 4.2 kg
Ambient Temperature: 22 +/- 2%
Relative Humidity: 65 +/- 5%
20K ohm /-10 dBV +/-0.1 dB (316 mV)
20K ohm /-10 dBV +/-0.1 dB (316 mV)
47K ohm /-50 dBV +/-0.1 dB (3.16 mV)
10K ohm /-50 dBV +/-0.1 dB (3.16 mV)
2.2K ohm /-10 dBV (316 mV) +/-2 dB
1K ohm /-10 dBV (316 mV) +/-2 dB
600 ohm /-6 dBm (390 mV) +/-2 dB
33 ohm /-10 dBV (316 mV) +/-2 dB
20 Hz – 20 kHz +/-2 dB
20 Hz – 20 kHz +2/-3 dB (RIAA)
20 Hz – 20 kHz +2/-3 dB
Less than 0.03% @1 kHz
Less than 0.1% @ 1 kHz (A-WEIGHTED)
Less than 0.1% @ 1 kHz (A-WEIGHTED)
More than +14 dBV
More than -26 dBV
More than -26 dBV
More than +18 dBV (8.0 V)
More than +13 dBV (4.5 V)
More than +4 dBV (1.58 V) LOAD=32 ohm
Less than -86 dBV
Less than -75 dBV
Less than -76 dBV
More than 70 dB @ 1 kHz for LINE, AUX and PHONO
More than 86 dB @1 kHz for LINE (AUX) to LINE (AUX),MIC
More than 85 dB @ 1 kHz for LINE to PHONO
10 +/-2 dB, below -32 dB at 70 Hz
10 +/-2 dB, below -32 dB at 1 kHz
10 +/-2 dB, below -32 dB at 13 kHz
Within 3 dB FROM 0 TO -40 dB
More than 85 dB at 1 kHz
More than 85 dB at 1 kHz
1 pc
1 pc
24
Specifications