Effects - Stanton M.207 User Manual

4.3 Effects
There can be 2 effects per button. One effect is located at the top and the other at the bottom of the button.
For example, A.Filter/M.Filter, Phaser/Flanger, etc.
Figure 4.3
Figure 4.4
Figure 4.5
Figure 4.6
Pressing the button once triggers the top effect (the button lights up solid). (Figure 4.3)
Pressing and holding the button engages the bottom effect (the button will blink to
indicate that the lower effect is engaged). (Figure 4.4)
To send an effect to a channel, the CHANNEL FX button must be pressed on that channel.
(Figure 4.5)
An FX button will light up red to let you know that it is active. Having the
FX button engaged on a channel will allow you to cue the effects on that channel, but
will not send the effect to the master output unless you press the
FX ENGAGE button (it will blink blue to let you know it is active). (Figure 4.6)
Now let's look at the effects!
10
Effects