Stanley 30SS Owner's Manual page 30

Problem
Snow blower will not
move forward or reverse
Cannot move snow
blower when the engine is
off
Engine is overheating
Rev: 12/21/2011
Troubleshooting
Possible Causes
1. Transmission cable out of
adjustment (too loose) or
damaged.
1. Transmission handle is pressed
into the engaged position
2. Transmission cable out of
adjustment (too tight)
1. Dirt in the fuel line
2. Dirty air filter
3. Low engine oil
4. Fouled spark plug
5. Misuse of the snow blower
Solution
1. Readjust transmission cable
If damaged, replace and readjust.
1. Release transmission handle
2. Readjust transmission cable
1. Replace fuel filter and flush tank
2. Clean or replace the air filter
3. Add engine oil
4. Replace spark plug
5. Walk the snow blower slowly
25
30SS, 36SS, 45SS