Installing The Software On A Mac Computer - Sierra Wireless AirCard 402 User Manual

Installing the Software on a Mac Computer

System Requirements
The AirCard 402 device works with any MacBook™ Pro or PowerBook
running Mac OS X version 10.4. 1 1 or newer.
To check your version, from the Apple menu (
earlier than 10.4. 1 1, then you must upgrade to version 10.4. 1 1 or newer; contact an Apple
reseller, an Apple retail store, or visit
To install and run the device and accompanying Sprint SmartView software on a Mac
computer, you will need an empty PC Card or ExpressCard slot.
Installing the Software and Drivers
Note As part of the installation process you will need to restart your computer; save any
open documents.
1.
Ensure you are in the Sprint Mobile Broadband coverage area (not roaming).
2.
If your computer has an AirPort
adapter, turn it off. (For instructions, see your computer's user guide.)
Section 2B. Installing the Software and Activating Your Device
) choose
www.apple.com/store
® ®
, AirPort Extreme , AirPort Express
®
G4 computer
About This Mac . If your version is
.
®
, or Bluetooth
13