Control Panel Settings - Epson 800 User Manual

Control Panel Settings

Changing control
panel settings
You can change the following "default" settings from the printer's
control panel:
Setting
Print direction
Font
Pitch
I/F mode
Auto I/F wait time
Software
Auto CR (IBM mode only)
AGM (IBM mode only)
Character table
Auto line feed
Network I/F mode
Loading position
Economy
Parallel I/F transfer rate
Follow these steps to change the settings listed above:
1. Make sure the printer is turned off and has paper loaded.
2. Hold down the
X
button. The printer prints a summary of instructions for
changing settings and choosing the language to use for additional
instructions.
3. Press the color cleaning button to print a list of current settings
X
and additional instructions.
4. After you make the changes you want, turn the printer off to save
the settings. The settings remain in effect until you change them
again.
B-7
Technical Specifications
Options
Auto, Bi-D, Uni-D
Courier, Roman, Sans Serif, Prestige,
Script, Roman T, Sans Serif H, Draft
10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
Auto, Parallel, Serial, Option
10 seconds, 30 seconds
ESC/P 2, IBM X24E
Off, On
Off, On
PC437, PC850, PC860, PC861, PC863,
PC865, Abicomp, BRASCII, Roman 8, ISO
Latin 1, Italic U.S.A., Italic France, Italic
Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
Off, On
Off, On
8.5 mm, 3 mm, Others
Off, On
Fast, Normal
color cleaning button and press the power