Adjusting The Lighting; Adjusting The Image; Zooming And Focusing Your Image - Epson ELPDC03 User Manual

Adjusting the Lighting

For presenting printed material or 3-D objects, the two lamps will
provide ample light. If the ambient lighting in the room is sufficient,
however, you may obtain a better image with the lamps off. Press the
button on the control panel to turn off the lamps. Press it again
Lamp
to turn the lamps back on.
Lamp button

Adjusting the Image

Once you see your image, you may need to make certain adjustments:
To zoom or focus your image, see the next section.
I
To freeze the image on screen, see page 16.
I

Zooming and Focusing Your Image

When you turn on the document camera, the Auto Focus feature is
turned on and the indicator light is lit.
Use the button on the control panel to enlarge the image, and
Tele
use the button to reduce it. The document camera will
Wide
automatically focus the image. Once the zoom or focus is set for a flat
document, you probably won't have to adjust it again for subsequent
documents.
Wide button Tele button
Using the Document Camera
15