Epson P-7000 User Manual page 75

2. Connect the other end of the USB cable to the connector on the printer.
*USB (Standard-A)
Note:
❏ See the printer's manual for the location of the cable connector on the printer.
❏ Disconnect the USB cable from the viewer when not operating with a computer or printer.
❏ When the viewer is connected to a printer, do not touch the Host-standard A connector interface.
The viewer's operation may become unstable.
❏ If a printer cannot be detected, the print job is saved.
3. On the confirmation screen, select Yes, then press the OK key.
4. The printer is automatically detected, and the Print Settings screen appears. Make the necessary
settings.
Setting
Number of Prints
*
Paper Size
Detail
Sets the number of prints.
Sets the size of paper to use.
R41A0K180 User's Guide
Creating Custom Print 75