Chapter 11 Troubleshooting; Error Messages / Icons - Epson P-7000 User Manual

Chapter 11
Troubleshooting

Error messages / Icons

When a problem occurs, an error message or icon usually appears in the LCD. Refer to the following
section to solve the problem.
Error message/Icon
Unable to access file.
An error occurred during verification.
Cannot access the hard drive. There may be a
problem with the hard drive, or it may not be
formatted as FAT32.
No response from the printer. Please check the
printer.
Description
Wait until the Access lamp turns off, then reinsert the memory card and
try again. Check if there is no data damaged.
Some files failed to be copied. Check the data.
Back up all the data to onto the computer, and test the format by following
the procedure in "Formatting Data in the Viewer" on page 99. If this does
not fix the problem, send the viewer to an authorized Epson service center.
(The data on the viewer will be deleted.) Repairs will be chargeable and
are not covered by Epson's warranties.
Make sure of the following.
- Your printer is on.
- The USB cable is connected correctly. (Printer: Standard-A. Viewer:
Mini-B)
- The cable supplied with the viewer is used.
- Your printer is compatible with PictBridge.
Check your printer and printer's manual.
Wait until the viewer cools down.
The battery power is running out. Charge the battery. For details, see
"Charging the battery" on page 90.
Press the reset button. See "Resetting the Viewer" on page 98 to find
how to use the Reset button.
R41A0K180 User's Guide
Troubleshooting 93