Cannot Copy; Cannot Delete; Cannot Increase The Hard Drive Capacity Of The Viewer Even If Deleting Files; Cannot Set/Unset As A Private Folder - Epson P-6000 User Manual

Cannot copy

Cause
The space available on the HDD is not sufficient
to copy all of the data in the memory card, or
the file may be damaged.
The set language does not support the files'
language.
Copy cannot be started as the USB device
connection cannot be recognized because the
USB device has lost power.

Cannot delete

Cause
The file is locked. Alternatively, the file existing
in the folder or subfolder is locked.

Cannot increase the hard drive capacity of the viewer even if deleting files

Cause
Check if data was deleted without using the
Epson Link2 software on the computer. Even if
deleting data in the viewer on the computer, if
the data has not been deleted completely,
hard drive capacity of the viewer cannot be
increased.

Cannot set/unset as a private folder

Cause
The password is wrong.
What to do
Delete unnecessary data in the HDD, reduce the size of data to copy from
the memory card, or try to copy a different file.
Renaming the file correctly enables you to access it. Alternatively, change
the language setting. For details, see "Changing the Viewer Settings" on
page 83.
Connect the AC adapter to the USB device. Alternatively, make sure that the
viewer is connected the AC adapter correctly.
What to do
See "Protecting files or folders" on page 57 and unlock the file to delete it.
What to do
After connecting the viewer to the computer, delete all the data in "Recycle
Bin" (Windows) or "Trash" (Macintosh).
What to do
If you forget the password, enter "5555", "7777", then "3333" to reset the
default password ("0000").
R41A0K180 User's Guide
Troubleshooting 95