Pointer Right Command; Pointer Left Command; Pointer Up Command; Pointer Down Command - Sanyo PLC-XL51 - 2700 Lumens Manual

PLC-XL51 Basic Serial Command Specifications

6.46. POINTER RIGHT Command

Command "C3A" [CR]
Move the Pointer of On-Screen Display Menu to the right.
Detail This command works differently from the pointer ">" of the projector and remote
control, and has no function of Volume +.
Acceptable
Response
Unacceptable

6.47. POINTER LEFT Command

Command "C3B" [CR]
Move the Pointer of On-Screen Display Menu to the left.
Detail This command works differently from the pointer "<" of the projector and remote
control, and has no function of Volume +.
Acceptable
Response
Unacceptable

6.48. POINTER UP Command

Command "C3C" [CR]
Move up the Pointer of On-Screen Display Menu.
Detail This command works differently from the button "▲" of the projector top panel,
and Zoom cannot be adjusted with this command.
Acceptable
Response
Unacceptable

6.49. POINTER DOWN Command

Command "C3D" [CR]
Move down the Pointer of On-Screen Display Menu.
Detail This command works differently from the button "▼"of the projector top panel, and
Zoom cannot be adjusted with this command.
Acceptable
Response
Unacceptable

6.50. ENTER Command

Command "C3F" [CR]
This command works the same way as "SELECT" button of the projector and
Detail
remote control.
Acceptable
Response
Unacceptable

6.51. CANCEL Command

Command "C42" [CR]
Detail This command works the same as "CANCEL" button of the remote control.
Acceptable
Response
Unacceptable
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
18/25