Image Color Board Command; Pointer Right Command; Pointer Left Command; Pointer Up Command - Sanyo PLC-XL50A - 2000 Lumens Manual

PLC-XL50 Basic Serial Command Specifications
6.46.

Image color board Command

Command "C39" [CR]
Detail Set Image to Color board mode.
Acceptable
Response
Unacceptable
6.47.

POINTER RIGHT Command

Command "C3A" [CR]
Move the Pointer of On Screen Display Menu to the right.
Detail This Command differs from the operation of pointer ">" on the projector, and has
no function of Volume +.
Acceptable
Response
Unacceptable
6.48.

POINTER LEFT Command

Command "C3B" [CR]
Move the Pointer of On Screen Display 0n Menu to the left
Detail This Command differs from the operation of pointer "<" on the projector, and has
no function of Volume -.
Acceptable
Response
Unacceptable
6.49.

POINTER UP Command

Command "C3C" [CR]
Move up the Pointer of On Screen Display Menu.
Detail
This Command differs from the operation of pointer "▲" on the projector.
Acceptable
Response
Unacceptable
6.50.

POINTER DOWN Command

Command "C3D" [CR]
Move down the Pointer of On Screen Display Menu.
Detail
This Command differs from the operation of pointer "▼"on the projector.
Acceptable
Response
Unacceptable
6.51.

ENTER Command

Command "C3F" [CR]
This command works the same as "SELECT" button of the projector and remote
Detail
control.
Acceptable
Response
Unacceptable
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
17/23