D.zoom - Command; Computer1 S-Video Command; Image Colorboard Command; Pointer Right Command - Sanyo PLC-XD2200 - XGA Able Multimedia Projector Manual

PLC-XD2200 / 2600 Basic Serial Command Specifications
6.40. D.ZOOM – Command
Command "C31" [CR]
Enter Digital Zoom mode and reduce image size.
Detail
This command works the same as "D.ZOOM ▼" button of the remote control.
Acceptable
Response
Unacceptable

6.41. Computer1 S-Video Command

Command "C34" [CR]
Select S-Video of Computer1 input.
Detail Although projector returns "OK", Input search is not executed with this command
while Input search is set to On1 or On2,
Acceptable
Response
Unacceptable

6.42. Image Colorboard Command

Command "C39" [CR]
Detail Set image to Colorboard mode.
Acceptable
Response
Unacceptable

6.43. POINTER RIGHT Command

Command "C3A" [CR]
Move the Pointer of On-Screen Display Menu to the right.
Detail This command works differently from the pointer ">" of the projector and remote
control, and has no function of Volume +.
Acceptable
Response
Unacceptable

6.44. POINTER LEFT Command

Command "C3B" [CR]
Move the Pointer of On-Screen Display Menu to the left.
Detail This command works differently from the pointer "<" of the projector and remote
control, and has no function of Volume +.
Acceptable
Response
Unacceptable

6.45. POINTER UP Command

Command "C3C" [CR]
Move up the Pointer of On-Screen Display Menu.
Detail
This command works the same way as the pointer "▲" of the projector.
Acceptable
Response
Unacceptable
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
16/23