Color Menu - Oki C5150n User Manual

The printer automatically adjusts color balance and
density at appropriate intervals, optimizing the printed
output for bright white paper viewed in natural daylight
conditions. The items on this menu provide a means of
changing the default settings for special or particularly
difficult print jobs. Settings revert to their default values
when the next print job is complete.
Note: Factory default settings are shown in
Item
DENSITY
CONTROL
ADJUST
DENSITY
AJST
REGISTRATION
C REG FINE
ADJUST
M REG FINE
ADJUST
Y REG FINE
ADJUST

Color Menu

Settings
AUTO
MANUAL
[EXECUTE]
[EXECUTE]
-3 to + 3 in
increments of 1
0
Default =
Printer Menu • 37
NOTE
Explanation
AUTO = image density is automatically
adjusted:
• at power on
• when a new image drum or toner
cartridge is installed
• at intervals of 100, 300 and 500 drum
counts
Auto adjustment takes up to 55
seconds.
Switch to manual only if you wish to
initiate Density Control manually using
the printer menu.
Selecting this will perform the auto
density set up.
Performs automatic color registration
adjustment. Normally this is done at
power on and when the top cover is
opened and then closed. This process
accurately aligns the cyan, magenta and
yellow images to the black image.
Performs fine adjustment of image
timing in relation to the black image
component.
A positive setting will darken the color; a
negative setting will lighten the color.
.
bold