Toner rubs off when you rub the printed surface.
Possible cause
Media Weight and
Media Type settings
may not be appropriate.
Packing materials were
left on the fuser when it
was installed.
Remedy
Set the value of media weight in the menu to
the next heaviest one (
MEDIA WEIGHT
Careful! Fuser my be HOT!
Open the top cover and check to be sure that
all the packing materials were removed from
the fuser. To remove the fuser see "Fuser
Replacement" on page 70.
Troubleshooting • 109
MEDIA MENU
).
→
YYY