Setting Quick Photo Review; Viewing Photo Properties - Epson PhotoPC L-500V User Manual

Setting quick photo review

When the quick photo review setting is on, the photo is displayed on the LCD monitor for about
3 seconds after you take it. This function may be turned ON or OFF. The default setting is OFF.
Note:
The quick photo review is not available when using the continuous photography mode.
1. Turn the Mode dial to SETUP. The Setup Menu 1 is displayed.
2. Select Qk View/Sd Memo by moving the joystick u or d, then move the joystick r.
3. Select ON or OFF, then press the OK button.

Viewing Photo Properties

This camera enables you to display basic or detailed photographic information on the LCD monitor
depending on the Info Disp setting, which you make in the Playback Menu.
1. Move the joystick u or d to select Info Disp (Information Display), then move the joystick r.
2. Move the joystick u or d to select Basic Info, Detailed Info, or Off. Then press the OK button.
If you select the Detailed Info setting, the following information will be displayed on the LCD
monitor:
Viewing and Managing Your Photos
3
3
3
3
3
3
3
3
3
3
49